As a kind of mechanical equipment driven by centrifugal force to quickly dry the drum, the stacked screw type sludge dewatering machine is different from other types of mechanical equipment. If we fail to grasp the corresponding standards, it will not only have low efficiency, but also be unsafe. But if you can follow the following small series to you mentioned these matters to operate, then you can achieve twice the result.

1. During the first installation, in order to ensure the stability of its subsequent operation, we not only need to ensure the flatness and firmness of the installation ground, but also need to bolt the fastening bolts of the base. For the stacked screw type sludge dewatering machine with a diameter greater than 800, we should dig a hole under the base and pour concrete to ensure the stability of its operation.

2. Each screw type sludge dewatering machine has its own rated loading capacity. We can't load less or overload. Less load will cause the inner cylinder to run too fast and waste energy, while overload will not only cause the uneven movement of the cloth in the cylinder (J ū N Y ú n), but also cause the motor pressure to be too high and damage for a long time. Scientifically, it is suitable to load about 80% of the specified capacity.

3. Generally speaking, the dehydrator can dry a tube of objects in 5-8 minutes at a time. Although too much time does not affect the performance of the machine itself, it will greatly affect our overall production efficiency.

4. When we use the stacked screw sludge dehydrator to dehydrate and dry the cloth and grass, we should inspect whether there are sharp objects (such as iron and stone at the end of the object) inside. Although these objects will not bring fatal impact to our stacked screw sludge dehydrator, they will make a loud noise. The sludge dewatering device of stacked screw filter press is widely used in tailing dry discharge, sand washing sludge dewatering, construction piling sludge, papermaking sludge, textile printing and dyeing sludge, leather sludge, mine beneficiation sludge dewatering, food factory activated sludge, circuit board sludge, ceramic and marble polishing sludge, electroplating sludge, water washing kaolin sludge, coal washing plant clean coal dewatering, river and pond sediment sludge Organic sludge of chemical plant, etc.

5. For the stacked screw type sludge dehydrator with the upper cylinder cover, we should cover it when using it, so as to effectively prevent the dehydrated objects in the inner cylinder from being thrown out due to centrifugal force, and at the same time, we should also tighten the corresponding safety lock when the cover is used. The tension of the filter belt of the mobile sludge dewatering machine is realized by the air cylinder, so that the whole filter belt can maintain constant tension, and the tension will not be changed due to the change of the feed volume, which is convenient for operation and management. The filter press has an air pressure control system which can automatically detect the position of the filter belt on the pressure roller and automatically correct the deviation. For the wide filter sludge dewatering device, it is also equipped with an automatic sludge feeding device Ensure the sludge into the filter belt evenly, so as to improve the filtration efficiency and prolong the life of the filter belt.

6. If the screw type sludge dehydrator is not completely stopped, then we must not put our hands in to deliver the cloth grass, because it is easy to cause entanglement accidents, which is a very big security risk, and we should turn off the power when we take and deliver the goods.

7. We need to inspect the dehydrator regularly to ensure the stability of its belt, inner cylinder and foot bolt. We should adjust and replace the parts with any problem (Emerson) and failure in time. The sludge dewatering equipment commonly used in the stacked screw type sludge machine are: Belt Thickening and dewatering integrated machine, belt vacuum filter, stacked screw type sludge filter press, drum type thickening and dewatering integrated machine, plate and frame filter press, belt filter press, etc. To prevent secondary safety accidents.