Stacked screw sludge dewatering machine is widely used in many industries. However, due to the diversity of models and styles of stacked screw sludge dewatering machine, it also adds a lot of troubles to customers when choosing stacked screw sludge dewatering machine. So how should customers choose their own stacked screw sludge dewatering machine?

1. According to the nature of the material: for example, the customer needs to dehydrate a variety of fresh vegetables efficiently, but it can not cause damage to the vegetables. At this time, the best choice is the frequency conversion screw type sludge dehydrator. The speed of the frequency conversion screw type sludge dehydrator is adjustable. The customer can choose the appropriate speed according to the tolerance of different vegetables to centrifugal force.

2. In addition, if the heavier materials need to be dehydrated, the stacked screw type sludge dehydrator with conical bottom should be selected; if the lighter materials such as vegetables and textiles need to be dehydrated, the stacked screw type sludge dehydrator with larger effective volume can be considered. The sludge dewatering device of stacked screw filter press is widely used in tailing dry discharge, sand washing sludge dewatering, construction piling sludge, papermaking sludge, textile printing and dyeing sludge, leather sludge, mine beneficiation sludge dewatering, food factory activated sludge, circuit board sludge, ceramic and marble polishing sludge, electroplating sludge, water washing kaolin sludge, coal washing plant clean coal dewatering, river and pond sediment sludge Organic sludge of chemical plant, etc.

3. According to the number of materials: the number of materials can determine the size of the stacked screw sludge dewatering machine. Generally, when selecting, not only the load of the stacked screw sludge dewatering machine at one time, but also the work efficiency should be improved, the working time of workers should be greatly reduced, and the labor cost should be reduced. The sludge dewatered by the vehicle mounted screw stacking dehydrator is generally easier to store and transport than the concentrated or liquid sludge. Generally, the sludge is required to be dewatered before incineration to remove the moisture of the sludge and increase the calorific value. 2. The sludge is also required to be dewatered before landfilling to reduce the amount of leachate produced in the landfill.